Microtest 6630 Impedance Analyzer

Product Description:

The test frequency of the 6630 Precision Impedance Analyzer is DC 10Hz-30MHz and the test sigal is 10mV-2Vrms (min. resolution 1mV), and is suitable for the LCR and DCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. The machine also supports LAN, USB and GPIB PC connection capabilities to improve the design and test efficiency significantly. MICROTEST 6630 Impedance Analyzer also provides fixtures for material dielectric permittivity measurement that allows PCB designed engineers to reduce the faulty conditions with the comprehensive information of permittivity while designing PCB layouts.

Signal source frequency range: DC 10Hz ~ 3/5/10/20/30MHz

Signal source grade: 10mV ~ 2V / 200μA ~ 20mA

Basic accuracy up to ±0.08%

ALC function

Output resistance 25Ω/100Ω, switchable

Wide resistance measurement range from 25 mΩ to 40 MΩ (measurement accuracy up to 10%)

Parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, DCR, ESR, Vac, Iac, Vdc and Idc

Ultra-high measuring speed <3ms

Open circuit/short circuit/load calibration function

Electric meter mode, multistep list mode, scan & analyze mode

Up to four component parameters can be selected in the electric meter mode. The induction and DCR values can be measured and displayed simultaneously

Auto component classification: Comparator function and Handler BIN classification function

Up to 50 sets of multistep list programs can be stored in the permanent memory and up to 15 test steps can be arranged in each program

Rapid automation and data access function is realizable for USB, LAN, GPIB and RS232 interfaces

PC connection data analysis software is available optionally

7″ 800*640 TFT LCD color screen

Ultra-light design: 365*145* 360mm, 3kg

Ultra-low power consumption (<30W) without fans and zero noise

Product Specification:

Specification

Test Frequency

6630-03,6330-03G         10Hz ~ 3MHz

6630-05,6330-05G         10Hz ~ 5MHz

6630-10,6330-10G         10Hz ~ 10MHz

6630-20,6330-20G         10Hz ~ 20MHz

6630-30,6330-30G         10Hz ~ 30MHz

Minimum Resolution     100mHz, 6-bit Frequency Input

Accuracy            ± 0.01％

Basic Accuracy  ± 0.08%

AC Measurement

Test Signal Voltage Level             10mV – 2Vrms

Voltage Minimum Resolution    1mV

Accuracy            ALC ON：6％ * Voltage ± 2mV

ALC OFF：10％ * Voltage ± 2mV

Test Signal Current Level             200µA – 20mArms

Current Minimum Resolution    10µA

Accuracy            ALC ON：6％ * Current ± 20µA

ALC OFF：10％ * Current ± 20µA

Test Time  (The fastest) < 3mS

Output Impedance        25Ω/100Ω, switchable (Nominal value)

Parameters       |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR

Measurement Mode     Meter mode, Graphic scanning*, Multi-steps mode

Marked with* graphic scanning function only applies to G series model

Calibration        Open Circuit/ Short Circuit/Load Calibration

Measurement Circuit    Series/Parallel

Multi-steps Mode          50 groups of Multi-steps setting (Each group contains up to 15 steps)

PC LINK / CPK    Option

Flash Memory   Built-in flash for setting 100 set documents

USB       LCR setting documents, BMP graphics, Test result data

Interface

I/O Interface     Handler

Serial Interface USB、RS232

Parallel Interface            GPIB

Display 7.0”TFT, 800×480 Color Screen

Environment     Temperature: 10℃ ～ 40℃   Humidity: ≦90%

Power Supply    Voltage 90V ～ 264Vac

Frequency         47Hz ~ 63Hz

Power Consumption     Low power consumption: Maximum 30W (Nominal value)

Dimension (W*H*D)     344x145x343 mm

Weight 3 kg

Parameters Measurement Ranges

|Z|, R, X              ± 0.000mΩ to 999.999MΩ

｜Y｜ G B          ± 0.00000μS to 999.999kS

DCR       0.00mΩ to 100MΩ

C            ± 0.00000pF to 999.999F

L            ± 0.00nH to 999.999kH

D           ± 0.00000 to 9.99999

Q           ± 0.00 to 999999

θ            ± 0.000° to 180.000°

Δ%         ± 0.000% to 999.999%

Applications

Dielectric Material         Estimation on permittivity and consumption tangent of plastic, ceramic and PCB

Passive Components     Capacitor, Inductor, Resistor, Transformer, Ceramic resonator

Semiconductor Components     The CV characteristics analysis of varactor diodes, Diodes

Other Components        Estimation of the impedance of PCB components

Electromagnetic Material