1077 Milliamp Transducer Simulator

Product Description:

A multi-purpose handheld test instrument that can be used as an adjustable current load, adjustable power supply, or precision current source.

The 1077 is commonly used for the testing and simulation of milliamp transducer systems. Compact and rugged design make the 1077 ideal for use in both the lab and field, with protective rubber cover to increase durability. The instrument is built to withstand arduous use, meaning it is well suited to process control applications.

Three Operating Modes:

1. As an adjustable current load (simulating the transducer) on the line, the 1077 will draw up to 100mA from the line. The required current is set by the front panel controls.

2. As an adjustable power supply (14V to 40V) with accurate measurement and display of the current drawn from the circuit.

3. As a precision current source with 14V to 40V maximum (adjustable) drive capacity. It will source the set current up to 100mA to the loop.

Safety Terminals

Fitted as standard and fully compatible with 4mm shrouded plugs, as well as standard plugs, bare wires, and spade terminals.

Added Protection

The 1077 comes fitted with an ergonomic rubber cover providing increased protection and durability. It has a textured grip for comfortable handling and openings at the top and bottom to allow access to the battery meter and a position to place labels if required. It is easy to remove if the user prefers a stand-alone unit or to house the 1077 in the optional 9027 carry case.

Portable Operation

Rechargeable batteries and mains charger are supplied with the unit as standard. Complete recharge time is 10 to 12 hours although sufficient charge for a few hours operation can be obtained with only 30 minutes charge. Full charge allows 10 hours typical use. The battery condition monitored by a meter on the top of the 1077.

Product Specification:

SOURCE AND LOAD

Output 0 to 100mA in 3 ranges:

0 to 99.99mA in 10μA steps

0 to 9.999mA in 1μA steps

0 to 999.9μA in 0.1μA steps

Accuracy            ± 0.02% of setting + ± 0.02% of range + ± 0.02μA.

Output Stability Less than 60ppm/°C. Less than 25ppm per hour at constant temperature

Output Noise    Less than 15ppm of full scale.

Drive Voltage    Adjustable from 14 to 40 volts (Source mode).

Drive Power      2.4 watts maximum.

Applied Voltage              3 volts minimum to 40 volts maximum (Load mode).

Voltage Limit Indicator Provides indication of insufficient drive voltage.

24 VOLT LİNE SİMULATİON

24 V Line Simulation      Adjustable 14V to 40V, 100mA current limit, Maximum output power 2.4 watts.

Display A 3.5 digit (1999 max) LCD display indicating line current.

Measure Range 0 to 20mA

Resolution         10μA

Accuracy            0.2% of reading + 1 count.

Dimensions       H200 x W75 x D110mm (H215 x W100 x D120mm including protective cover)

Weight 1.1kg (1.5kg including protective cover)

Power Supply    NiMH rechargeable batteries with external mains recharger (supplied). Standard mains voltage is 220–250V, 50/60Hz. 100–125V, 50/60Hz is available but must be specified on ordering.

Supplied With   Protective cover (fitted), rechargeable battery pack (installed) with mains charger, and user manual

Optional Extras Leather carry case. Calibration certificates traceable to NPL and UKAS

Country of Origin           UK