Microtest 6375 LCR Meter

Product Description:

The 6375 LCR Meter that is provided with high accuracy and speed. It is a cost and multiple- function utility and is able to perform the component test entirely. 6375 can collocate with DC Bias. The friendly operation interface design is in synchronization with the international trend and easy to operate to import into the production lines quickly. Synchronous tests with multiple parameter settings. Because of the high-precision values of measured data and superior efficacy, it must be a necessary testing instrument of components and materials. It supports the interfaces of RS232, LAN, USB and GPIB PC connections.

Basic accuracy up to 0.1%

Synchronous tests with multiple parameter settings

Measurement of wide range of functions: Freq. to 5 Digits, signal level of 10mV to 2Vrms

Collocating DC Bias to progressing current scanning analysis

Fixture design capabilities, Specific customized services for clients

LCR Meters are all compatible with convenient and efficient Meter Link Software

Product Specification:

Measurement Data

Test Frequency 20Hz-200KHz

Points Of Test Frequency            Continuity

Basic Accuracy  ± 0.1%

AC Drive  Level  10mV to 2Vrms (1m Vrms steps)

DC Drive  Level  0.01V~2V

Output Impedance        100Ω

Frequency trimming resolution 5 Digits

Frequency output accuracy        ± 0.01%

AC test speed (Max.)     75mS

AC test speed (Fast)       150mS

AC test speed (Medium)             450mS

AC test speed (Slow)     600mS

DC test speed (Max.)     30mS

DC test speed (Fast)       60mS

DC test speed  (Medium)            120mS

DC test speed  (Slow)    500mS

DC Bias Current Source Option (Model 6220)

Specifications

Measured Value Detection Mode           Define upper and lower thresholds according to main and sub parameters

ESR        Series/Parallel

Mathematical Mode      Absolute/Percentage

Test Range         Automatic/Lock

Indicator            Pass/Fail/Bias LED and Built-in speaker

Output Terminal            BNC connector

Safety   EN61010-1

Immunity           EN61326-1

Emissions          EN55022 Class A

Calibration        Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures

Auto-save when power-off function       When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again

Power Supply    Voltage 90-132Vac or 198-264Vac (selectable)

Frequency 47 ~ 63Hz

Display 320*240 dot-matrix display

Interface            RS-232, GPIB (option), Handler (option)

Flash Memory   Built-in flash for storage of 64 groups of Multi-steps setting (Each group contains up to 30 steps)

Operation          Auto、Manual、RS-232、GPIB (option)、Handler (option)

Environment     Temperature : 10°C to 40°C Humidity : 20 ~ 90%

Dimension (W*H*D)     340x133x525 mm

Weight 6.5 Kg

Parameters Measurement Ranges

｜Z｜ R X           0.1 mΩ – 100MΩ

｜Y｜ G B          10nS – 1000S

Cs Cp    0.01pF – >1F

Ls Lp     0.01nH – 100KH

D           0.00001 – 9.9999

Q           0.1 – 9999.9

DCR       0.1mΩ – 100MΩ

Δ%         -999.99% – 999.99%

Θ           -180° – +180°

Applications

Resistance, Capacitance, Inductance, Oscillators, Sensors, Delay Line, Filters, Resonators